- Joined
- Aug 9, 2009
- Messages
- 43
- Reaction score
- 0
- Points
- 6
I have the Oakworks Pro-Luxe Electric Lift table with the flat top and thought I'd leave a little write-up here.
I LOVE my table. Absolutely love it. Best purchase I've made. If you call Oakworks, they will do their best to find a practitioner in the area who has one, so you can see it in person. They have been a fantastic company to deal with.
I tried to order another less expensive lift table prior to this. This was a major and well-known table company with an extremely low-cost table option. They delayed my order for 10 weeks, even though they had charged my card for the full amount on day one so I could pay 2.5 months of interest. Everytime I called they would say "it will ship on Thursday," then I'd call back on Monday after it was "supposed" to ship so I could get the confirmation number and they'd give me some cockamamie story about how they 'didn't have a part, and had to order it and the legs were being handcarved by monks with seashells living in the darkest Alps of South America using only the light of flickering fireflies..."
I finally cancelled the order. Called Oakworks, and the sales rep called me back the NEXT DAY with the contact of someone on the other side of town with the table I was interested in. She had already called and asked if I could come look at it...
Anyways, this table is super quiet. My clients half the time don't even notice they are going up and down. It's also extremely stable. I have a couple of larger 250 lb + people I work on, and if they sit on the edge it doesn't even shift. The motor doesn't bog down either, it runs just as smooth when loaded as when it's not.
I practice Shiatsu, and don't have any issues climbing up on the table and standing over my client. I won't tell what I weigh, let's just say that I'm very muscular and kind of tall, NOT a featherweight, and with a 200 lb person lying on the table, and me standing over them, there was absolutely no feeling of instability, no cracking or squeaking. I also often will kneel on one edge of the table to do deep diaphragmatic breathing assisted presses, and there is no side shimmy.
I got the aero-cell top upgrade, and it's super plush. I also have an arm rest that doubles as a table extender. I've never used an armrest before, but now I use it in almost every session because it's so easy to attach and remove.
The face cradle took some getting used to, but if you've used oakworks, you know what I'm talking about. It's a double-ratchet system and extends out from the table when placed in the flat position. IMO, Stronglite and Robert Hunter make superior face cradles with their double action and staying tight to the end of the table, but they don't fit this table. My face rest pad is from Boiance and I can't recommend this enough. I ordered my table with no face cradle pad, since I already had the Boiance.
What else... this table comes with TWO foot pedals... STANDARD. One for each side of the table. However, I am right/left impaired, so it took some getting used to regarding which pedal goes up and which down. (Even though there are arrows. LMAO!)
I got the regular terratouch, instead of the upgraded duratouch, it is still good quality and soft. The duratouch will not hold its shape quite as well if I am standing/kneeling on it, I was told by the rep, so I was concerned about making it out of shape considering I stand and kneel on my table during treatments. It probably wouldn't be a problem, but I'm pretty particular, so went with the regular vinyl, which is PVC-free.
I can move it fairly easily to one side due to the wheels at one end. The wheels are necessary for it raising and lowering. Since it wheels, you may not be able to use the same rug under the table, you will either need "wheel grooves" or an especially grippy no-slide rug. Otherwise it will bunch after a few adjustments.
Cons: I can no longer store anything under the table, this necessitated me rearranging things quite a bit. I had several totes under the portable table with pillows, table covers, and other "junk." (This is also a "pro" because my room looks nicer. LOL!)
You MUST remember to lower the table after therapeutic work. I had one lady get "stuck" up there because I was working on such specific small muscle problem I had the table raised up to my bellybutton height, and I am tall.
I have heard from one client that the split top can be uncomfortable at the seam, depending on where it hits when they are lying face down. I can't verify that. I have a single rectangular top, no split.
It is expensive. All told, mine was $2088. That included a new pneumatic stool, the arm rest, the padding upgrade, face cradle but no pad, and premium delivery service. (They brought it right to my treatment room, set it up and hauled away the junk. Well worth the extra $100 if you ask me.)
Would I do it again? In a heartbeat and 6 months sooner. Yes, there is a tax credit. I believe it is only on the table itself, but it is still $730 for me. The rest is a straight expense. You can use a sched 179 to take the expense all in one year, or you can take depreciation of the remainder over 5 years. I don't know which I will do yet.
Hope that helps any who are looking for a lift table.
By the way, I received my table 4 weeks after ordering instead of the stated 3. It was actually sent on time by Oakworks, but the shipping company got bought right in the middle of my shipment, so my table was sitting on their dock for a week. I called Oakworks, and they called the freightline and lit a fire under their butts to get my table delivered.
: If it weren't for Oakworks' follow-through, even after the table left their hands, it might still be sitting on a freight dock somewhere. HA!
Stacey
I LOVE my table. Absolutely love it. Best purchase I've made. If you call Oakworks, they will do their best to find a practitioner in the area who has one, so you can see it in person. They have been a fantastic company to deal with.
I tried to order another less expensive lift table prior to this. This was a major and well-known table company with an extremely low-cost table option. They delayed my order for 10 weeks, even though they had charged my card for the full amount on day one so I could pay 2.5 months of interest. Everytime I called they would say "it will ship on Thursday," then I'd call back on Monday after it was "supposed" to ship so I could get the confirmation number and they'd give me some cockamamie story about how they 'didn't have a part, and had to order it and the legs were being handcarved by monks with seashells living in the darkest Alps of South America using only the light of flickering fireflies..."
I finally cancelled the order. Called Oakworks, and the sales rep called me back the NEXT DAY with the contact of someone on the other side of town with the table I was interested in. She had already called and asked if I could come look at it...
Anyways, this table is super quiet. My clients half the time don't even notice they are going up and down. It's also extremely stable. I have a couple of larger 250 lb + people I work on, and if they sit on the edge it doesn't even shift. The motor doesn't bog down either, it runs just as smooth when loaded as when it's not.
I practice Shiatsu, and don't have any issues climbing up on the table and standing over my client. I won't tell what I weigh, let's just say that I'm very muscular and kind of tall, NOT a featherweight, and with a 200 lb person lying on the table, and me standing over them, there was absolutely no feeling of instability, no cracking or squeaking. I also often will kneel on one edge of the table to do deep diaphragmatic breathing assisted presses, and there is no side shimmy.
I got the aero-cell top upgrade, and it's super plush. I also have an arm rest that doubles as a table extender. I've never used an armrest before, but now I use it in almost every session because it's so easy to attach and remove.
The face cradle took some getting used to, but if you've used oakworks, you know what I'm talking about. It's a double-ratchet system and extends out from the table when placed in the flat position. IMO, Stronglite and Robert Hunter make superior face cradles with their double action and staying tight to the end of the table, but they don't fit this table. My face rest pad is from Boiance and I can't recommend this enough. I ordered my table with no face cradle pad, since I already had the Boiance.
What else... this table comes with TWO foot pedals... STANDARD. One for each side of the table. However, I am right/left impaired, so it took some getting used to regarding which pedal goes up and which down. (Even though there are arrows. LMAO!)
I got the regular terratouch, instead of the upgraded duratouch, it is still good quality and soft. The duratouch will not hold its shape quite as well if I am standing/kneeling on it, I was told by the rep, so I was concerned about making it out of shape considering I stand and kneel on my table during treatments. It probably wouldn't be a problem, but I'm pretty particular, so went with the regular vinyl, which is PVC-free.
I can move it fairly easily to one side due to the wheels at one end. The wheels are necessary for it raising and lowering. Since it wheels, you may not be able to use the same rug under the table, you will either need "wheel grooves" or an especially grippy no-slide rug. Otherwise it will bunch after a few adjustments.
Cons: I can no longer store anything under the table, this necessitated me rearranging things quite a bit. I had several totes under the portable table with pillows, table covers, and other "junk." (This is also a "pro" because my room looks nicer. LOL!)
You MUST remember to lower the table after therapeutic work. I had one lady get "stuck" up there because I was working on such specific small muscle problem I had the table raised up to my bellybutton height, and I am tall.
I have heard from one client that the split top can be uncomfortable at the seam, depending on where it hits when they are lying face down. I can't verify that. I have a single rectangular top, no split.
It is expensive. All told, mine was $2088. That included a new pneumatic stool, the arm rest, the padding upgrade, face cradle but no pad, and premium delivery service. (They brought it right to my treatment room, set it up and hauled away the junk. Well worth the extra $100 if you ask me.)
Would I do it again? In a heartbeat and 6 months sooner. Yes, there is a tax credit. I believe it is only on the table itself, but it is still $730 for me. The rest is a straight expense. You can use a sched 179 to take the expense all in one year, or you can take depreciation of the remainder over 5 years. I don't know which I will do yet.
Hope that helps any who are looking for a lift table.
By the way, I received my table 4 weeks after ordering instead of the stated 3. It was actually sent on time by Oakworks, but the shipping company got bought right in the middle of my shipment, so my table was sitting on their dock for a week. I called Oakworks, and they called the freightline and lit a fire under their butts to get my table delivered.
: If it weren't for Oakworks' follow-through, even after the table left their hands, it might still be sitting on a freight dock somewhere. HA!Stacey
Thanks!!
416-817-3366 to book and Walk in the back door there is plenty of parking available
️
SPARKLING SPA
50 Lockridge Ave Unit 8
Markham, ON L3R 8X4
NEW GIRLS
🏵 at 1536 Warden Avenue 
647 346-8086
JENNY’S SPA
Monica (New) Colombian | Thailand, beautiful & shapely...Excellent Service...
Linda | My Linh (New) 21Yrs, a full body Malaysian Vietnamese...Very Comfortable Treatment Offered...
a very clean spa at 4578 Yonge Street, unit 100 
416 222-5554
𝓗𝓸𝓵𝓲𝓭𝓪𝔂 𝓢𝓹𝓪
𝗡𝗘𝗪 𝗢𝗥𝗜𝗘𝗡𝗧𝗔𝗟 𝗦𝗣𝗔
𝐀 𝐒𝐏𝐀
at 4386 Sheppard Avenue east 
416 297-7488
647 348-2899
Real pictures
️
address: #5-30 Rambler dr Brampton ,Ontario L6W 1E2
𝓕𝓞𝓡𝓔𝓥𝓔𝓡 𝓢𝓟𝓐
𝗗𝗥𝗘𝗔𝗠 𝗜𝗡𝗡 𝗪𝗘𝗟𝗟𝗡𝗘𝗦𝗦 𝗦𝗣𝗔
We have amazing girls today 
Mandy | Mady (New) Indian | Filipino 19Yrs, hair to shoulder 
(155 East Beaver Creek Rd Unit #8, Richmond Hill) 416-731-8565
